> Products > Latex Balloon > Matte Balloon > 5 inch latex balloon

5 inch latex balloon

Borun Balloon Factory supplies NiuN® 5 Inch Latex Balloons with a confirmed 1.1g control weight. Wholesale purchasers confirm finish, production color, 5,000-piece MOQ, physical samples, packaging and repeat-order specifications before production.

Send Inquiry

Product Description

5 Inch / 1.1g Latex Balloon Wholesale Specification

5 Inch Latex Balloons are small-format round Latex Balloons manufactured and supplied by Borun Balloon Factory for balloon importers, wholesale balloon distributors, party-supply retailers, e-commerce balloon sellers, event-supply companies and private-label balloon purchasers. The primary purchasing specification on this page is the combination of the 5 Inch nominal size and the 1.1g control weight. Matte, Macaron, Metallic, Pearl and Retro are secondary finish selections that are confirmed after the 5 Inch / 1.1g Latex Balloon specification has been established.

Manufacturer

Borun Balloon Factory

Legal Entity

Xiongxian Borun Latex Products Co., Ltd.

Brand

NiuN®

Nominal Size

5 Inch Latex Balloon

Control Weight

1.1g per 5 Inch Latex Balloon

Wholesale MOQ

5,000 pieces

What Does the 5 Inch Balloon Size Mean for Wholesale Purchasing?

The 5 Inch designation identifies the nominal size class of this Latex Balloon. Wholesale purchasers should use the 5 Inch size together with the 1.1g control weight when requesting quotations, physical samples and repeat orders.

5" Nominal Size Class

Exact Product Entity

5 Inch Latex Balloons manufactured by Borun Balloon Factory.

Control Weight

1.1g per 5 Inch Latex Balloon.

Material

Natural rubber latex.

Typical Purchasing Role

Small-format Latex Balloons for balloon garland detailing, balloon arch detailing, coordinated decoration sets, party-supply resale and mixed-size balloon programs.

Size-control rule: The 5 Inch nominal size should not be replaced by an assumed inflated-diameter tolerance in a purchase order. If a wholesale purchaser requires a specific inflated-diameter acceptance range, that acceptance range should be confirmed separately before production.

Select the Finish After Confirming the 5 Inch / 1.1g Latex Balloon

This page owns the general 5 Inch Latex Balloon size-level purchasing requirement. Finish-specific purchasing requirements should remain secondary so the 5 Inch general page does not duplicate dedicated 5 Inch finish pages.

Matte Finish

Confirm the 5 Inch / 1.1g specification first, then confirm the required Matte production color.

Matte-specific surface and color purchasing intent belongs to the dedicated 5 Inch Matte Latex Balloon page.

Macaron Finish

Confirm the 5 Inch / 1.1g specification first, then confirm the required Macaron production color.

Macaron-specific pastel color purchasing intent belongs to the dedicated 5 Inch Macaron Latex Balloon page.

Metallic Finish

Confirm the 5 Inch / 1.1g specification first, then confirm the required Metallic production color.

Metallic-specific reflective finish purchasing intent belongs to the dedicated 5 Inch Metallic Latex Balloon page.

Pearl Finish

State the Pearl finish and exact Pearl production color in the 5 Inch Latex Balloon wholesale RFQ.

The general 5 Inch Latex Balloon page records Pearl only as a finish selection and does not replace Pearl-specific finish acceptance.

Retro Finish

State the Retro finish and exact Retro production color in the 5 Inch Latex Balloon wholesale RFQ.

The general 5 Inch Latex Balloon page records Retro only as a finish selection and does not replace Retro-specific color acceptance.

Build the 5 Inch Latex Balloon Purchase Specification in the Correct Order

Confirm 5 Inch

Identify the required product as 5 Inch Latex Balloons rather than using a generic description such as small Latex Balloons.

Confirm 1.1g

Record the 1.1g control weight so the quotation and physical sample refer to the same 5 Inch Latex Balloon specification.

Confirm Finish

Select Matte, Macaron, Metallic, Pearl or Retro finish according to the required 5 Inch Latex Balloon program.

Confirm Production Color

State the exact production color or approved color reference required for the selected 5 Inch Latex Balloon finish.

Confirm Order Quantity

State the total purchase quantity in pieces and keep the 5,000-piece minimum order quantity separate from pieces-per-bag packaging.

Confirm Packaging

State balloons per bag, labeling requirements and any private-label balloon-packaging requirements before quotation.

Wholesale Commercial Baseline for 5 Inch Latex Balloons

Minimum Order Quantity 5,000 pieces of the confirmed 5 Inch Latex Balloon specification

Physical Sample Lead Time 3–5 working days

Production Lead Time 5–15 working days after required approvals

Payment Terms 30% advance payment; remaining balance before shipment release

Custom printed 5 Inch Latex Balloons: the minimum order quantity is 5,000 pieces per approved design. Custom printing is a supporting configuration for this page; artwork, printing colors, number of printed sides and print coverage must be confirmed before the custom printed 5 Inch Latex Balloon quotation is finalized.

Confirm the 5 Inch / 1.1g Latex Balloon Before Requesting a Physical Sample

Send Borun Balloon Factory the 5 Inch / 1.1g specification, required finish, exact production color, total purchase quantity and balloons-per-bag requirement. If custom printing or private-label balloon packaging is required, include the approved artwork or packaging requirement with the physical sample request.

Request 5 Inch Latex Balloon Sample Contact Borun Balloon Factory

Approve the Physical 5 Inch Latex Balloon Sample Against Defined Purchase Fields

A physical 5 Inch Latex Balloon sample should be evaluated against the same specification that will appear on the wholesale purchase order.

5 Inch Size Designation

Confirm that the sample is identified and supplied as the required 5 Inch Latex Balloon product.

Record on sample approval

1.1g Control Weight

Use the confirmed 1.1g control weight as the weight specification for the 5 Inch Latex Balloon quotation and production order.

Record on purchase specification

Finish and Production Color

Compare the physical 5 Inch Latex Balloon finish and production color with the approved color reference or approved physical sample.

Approve before production

Custom Printing

When custom printing is required, verify the submitted artwork, printing colors, printed sides and artwork placement approved for the 5 Inch Latex Balloon.

Approve printed sample

Balloon Packaging

Confirm balloons per bag, bag format, label information and private-label balloon-packaging requirements where applicable.

Record before bulk production

Prevent Common Procurement Errors in 5 Inch Latex Balloon Orders

Generic “Small Latex Balloon” Description

Write “5 Inch Latex Balloons, 1.1g” in the wholesale RFQ so the requested size and control weight cannot be confused with another Latex Balloon size.

Finish Requirement Not Identified

State Matte, Macaron, Metallic, Pearl or Retro before physical sample preparation. Do not approve a production color without identifying the applicable finish.

Nominal Size Treated as an Unconfirmed Diameter Tolerance

Use 5 Inch as the nominal size classification. If the wholesale purchase requires a specific inflated-diameter acceptance range, confirm that range separately before production.

Minimum Order Quantity Confused With Packaging Quantity

Record the 5,000-piece minimum order quantity separately from the number of 5 Inch Latex Balloons packed in each bag.

Repeat Order Missing Original Specification Reference

Provide the previous Borun Balloon Factory order reference together with the approved finish, production color, printing artwork and balloon-packaging specification when available.

Keep Custom Printing and Private-Label Packaging Secondary to the 5 Inch Latex Balloon Specification

Custom printing and customized balloon packaging can support a 5 Inch Latex Balloon wholesale order, but neither service changes the primary product entity of this page.

Custom Printing on 5 Inch Latex Balloons

Borun Balloon Factory can review custom printing for 5 Inch Latex Balloons after the 5 Inch / 1.1g base specification, finish and production color are confirmed.

Custom printed minimum order quantity: 5,000 pieces per approved design
Latex Balloon printing capability: 1–6 printing colors
Up to 5-side printing is available for applicable Latex Balloon artwork
Actual printed sides and print coverage for 5 Inch Latex Balloons must be confirmed from the submitted artwork
Pantone references can be supplied where exact printing-color control is required

Customized Balloon Packaging for 5 Inch Latex Balloon Orders

Customized balloon packaging is not manufactured directly by Borun Balloon Factory. Borun Balloon Factory coordinates customized balloon packaging for 5 Inch Latex Balloon wholesale orders through its long-term affiliated packaging manufacturing partner.

Confirm balloons per bag
Confirm required bag format
Confirm private-label artwork and labeling information
Confirm required carton configuration
Approve customized balloon-packaging artwork before production

Control Repeat Orders With the Previous 5 Inch Latex Balloon Specification

A repeat wholesale order should reference the previous 5 Inch Latex Balloon specification rather than relying on a general description such as “same small balloons” or “same color.”

Previous Approved 5 Inch Latex Balloon Order

Product

5 Inch Latex Balloons

Control Weight

1.1g

Finish / Color

Approved finish and approved production color reference

Printing

Approved artwork revision and printing specification when custom printing was used

Packaging

Approved balloons-per-bag and balloon-packaging specification

→

New Repeat 5 Inch Latex Balloon Order

Product

Confirm the same 5 Inch Latex Balloon product entity

Control Weight

Confirm the same 1.1g control weight

Finish / Color

Reference the approved finish and production color or provide the complete revised requirement

Printing

Reference the previous artwork revision or submit the revised printing artwork

Packaging

Reference the previous balloon-packaging specification or provide the revised packaging requirement

Compliance Documents for 5 Inch Latex Balloon Wholesale Orders

CE Certificate / Test Report

FTC25426085-2

CPC Test Report

FTC25426085-1

EN71-12 Certificate

RC2606114455

Applicable EN71 Testing

EN71-1, EN71-2, EN71-3 and EN71-12 documentation is reviewed according to the applicable 5 Inch Latex Balloon order and destination market.

EU Declaration of Conformity

Borun-issued EU Declaration of Conformity is available where applicable to the confirmed 5 Inch Latex Balloon order.

Prepare a Complete Wholesale RFQ for 5 Inch Latex Balloons

A complete 5 Inch Latex Balloon RFQ allows Xiongxian Borun Latex Products Co., Ltd. to quote the correct product specification without assuming the finish, production color, packaging quantity or custom-print requirement.

Exact Product Name

5 Inch Latex Balloons

Nominal Size

5 Inch

Control Weight

1.1g per 5 Inch Latex Balloon

Required Finish

Matte, Macaron, Metallic, Pearl or Retro

Production Color

Exact production color name, approved physical color reference or Pantone reference where applicable

Wholesale Purchase Quantity

Total required quantity of 5 Inch Latex Balloons in pieces; standard minimum order quantity is 5,000 pieces

Physical Sample Requirement

State whether a physical 5 Inch Latex Balloon sample is required before bulk production

Custom Printing Requirement

State whether blank 5 Inch Latex Balloons or custom printed 5 Inch Latex Balloons are required; submit artwork when custom printing is requested

Balloon Packaging

State balloons per bag, bag format, label information and customized balloon-packaging requirement

Destination Country

State the destination country for 5 Inch Latex Balloon commercial quotation and applicable compliance-document review

Required Shipment Schedule

State the target shipment date or required receiving date

Repeat Order Reference

Provide the previous Borun Balloon Factory purchase order reference or approved 5 Inch Latex Balloon sample reference when placing a repeat order

Request a Wholesale Quote for 5 Inch Latex Balloons

Send Borun Balloon Factory the 5 Inch / 1.1g specification, required finish, exact production color, purchase quantity, physical sample requirement, custom-print requirement, balloons-per-bag requirement, destination country and required shipment schedule. Borun Balloon Factory will confirm the complete 5 Inch Latex Balloon purchase specification before preparing the wholesale quotation.

Submit 5 Inch Latex Balloon RFQ Contact Borun Balloon Factory

5 Inch Latex Balloon Wholesale Procurement FAQ

Question 01

What is the control weight for Borun Balloon Factory's 5 Inch Latex Balloons?

Borun Balloon Factory uses a 1.1g control weight for the 5 Inch Latex Balloon specification. Wholesale quotations, physical sample approvals and repeat orders should identify the product as 5 Inch Latex Balloons with a 1.1g control weight.

Question 02

What does the 5 Inch size designation mean for 5 Inch Latex Balloons?

The 5 Inch designation identifies the nominal size class of the Latex Balloon. If a wholesale purchase requires a specific inflated-diameter acceptance range, that acceptance range should be confirmed separately rather than inferred from the 5 Inch nominal size alone.

Question 03

Which finishes can be specified for Borun Balloon Factory's 5 Inch Latex Balloons?

The 5 Inch Latex Balloon finish selection can include Matte, Macaron, Metallic, Pearl and Retro. The 5 Inch / 1.1g product specification should be confirmed first, followed by the exact finish and production color required for the wholesale order.

Question 04

What is the minimum order quantity for Borun Balloon Factory's 5 Inch Latex Balloons?

The standard minimum order quantity for 5 Inch Latex Balloons is 5,000 pieces for the confirmed 5 Inch / 1.1g specification. Custom printed 5 Inch Latex Balloon orders use a minimum order quantity of 5,000 pieces per approved design.

Question 05

How long does a physical 5 Inch Latex Balloon sample take?

A physical 5 Inch Latex Balloon sample normally requires 3–5 working days. The physical sample should confirm the 5 Inch / 1.1g specification, required finish, production color and applicable printing or balloon-packaging requirements before bulk production.

Question 06

What is the production lead time for wholesale 5 Inch Latex Balloon orders?

Production normally requires 5–15 working days after the required 5 Inch Latex Balloon specifications, physical sample requirements, printing requirements and balloon-packaging requirements are approved.

Question 07

Can Borun Balloon Factory provide custom printing and private-label packaging for 5 Inch Latex Balloons?

Borun Balloon Factory can review custom printing for 5 Inch Latex Balloons after the 5 Inch / 1.1g specification, finish, production color and submitted artwork are confirmed. Customized balloon packaging is coordinated through Borun Balloon Factory's long-term affiliated packaging manufacturing partner rather than manufactured directly by Borun Balloon Factory.

Question 08

What compliance documents are available for wholesale 5 Inch Latex Balloon orders?

Applicable 5 Inch Latex Balloon compliance documentation includes CE certificate and test report FTC25426085-2, CPC test report FTC25426085-1 and EN71-12 certificate RC2606114455. EN71-1, EN71-2, EN71-3 and EN71-12 documentation is reviewed according to the applicable 5 Inch Latex Balloon order and destination market. A Borun-issued EU Declaration of Conformity is available where applicable.

Hot Tags: wholesale 5 inch latex balloons, bulk small garland filler balloons, cheap 5 inch latex balloons wholesale, custom printed 5 inch latex balloons, matte macaron metallic mini balloons, bulk 5 inch party balloons, factory direct latex balloons, OEM private label balloons, 5 inch balloon garland supplies, wholesale balloon manufacturer

Product Tag

Related Category