Details and precautions for using an electric balloon pump!

一、 Usage Details of Electric Balloon Pumps

1. Open the power cord cover, remove the power cord and check if the wire and power plug are in good condition

2. Turn on the switch and check whether the electric balloon pump can work normally

3. Put the latex balloons, bubble balloons or other products you want to use onto the inflation nozzle of the electric balloon pump and press down to complete the inflation

4. For balloons of different sizes, different inflation nozzles are also provided. Just install them according to the corresponding sizes and they can be used.

二、Precautions for Using Electric Balloon Pump.

1. Power safety: Before use, it is necessary to check whether the power supply voltage matches the rated voltage of the electric Balloon Pump to prevent equipment damage or short circuit caused by voltage mismatch. If the plugs and wires are damaged, they should be replaced in time to prevent any danger from happening.

2. Operating environment: The electric balloon pump should not be used in damp or water-source areas to avoid the risk of electric shock. When the electric balloon pump is in operation, it may produce sparks. It should be kept away from fire sources and flammable and explosive items.

3. Prevent overload: Do not use it continuously for a long time. It is recommended to stop the machine and rest after working for a period of time to allow the equipment to dissipate heat fully and avoid motor overheating and burning out.