To verify heart latex balloon dimensions before a bulk wholesale order, inflate the exact heart-shaped latex balloon sample to the buyer-approved inflation condition. Measure the maximum horizontal width between the balloon's leftmost and rightmost outer edges, record the overall inflated height separately, and inspect the upper heart lobes, center notch, side curves and lower point. Link the measurements to the approved physical sample and the corresponding factory purchase specification.
Borun Balloon Factory manufactures and supplies wholesale heart-shaped latex balloons for importers, wholesale balloon distributors, event-supply retailers and procurement quality managers. A heart-shaped latex balloon cannot be dimensionally approved simply by measuring a standard round latex balloon diameter or reading the nominal inch designation on a purchasing label.
How is width measured on an inflated heart?
The width of an inflated heart latex balloon is the greatest left-to-right horizontal span of its visible heart-shaped body at the approved inflation condition. The measurement is taken from the leftmost outer edge to the rightmost outer edge. The measurement line must remain horizontal rather than following the curved surface or crossing the heart diagonally.
Borun Balloon Factory manufactures heart-shaped latex balloons from pure natural latex. The current heart latex balloon product range includes nominal 5-inch, 10-inch, 12-inch, 18-inch and 36-inch product specifications, with availability and exact configuration confirmed for the wholesale order.
Importers comparing a heart latex balloon manufacturer or wholesale heart latex balloon supplier can review Borun's heart-shaped latex balloon factory specifications for wholesale buyers to identify the relevant product family. The buyer should then request actual dimension evidence for the selected heart latex balloon size instead of borrowing a measurement from an unrelated round balloon model.
Heart Latex Balloon Maximum Width Measurement Diagram
The distance between the widest left and right external points of the inflated heart latex balloon. The line remains horizontal.
A separate vertical measurement. The buyer and Borun Balloon Factory must agree on the upper and lower measurement endpoints, including how the balloon neck is treated.
Both upper sections should be observed from the agreed front orientation for shape balance.
The central indentation and tapered bottom help distinguish the heart-shaped latex balloon from a round or oval balloon.
Illustrative vector diagram, not a dimensioned Borun production drawing or a photograph of a measured sample. The widest measurement level, actual numerical width and height endpoints must be verified on the approved inflated physical sample.
Practical Measurement Procedure for Wholesale Heart Latex Balloons
Record the selected nominal size, color, finish, actual unit weight and sample identification. Different heart latex balloon variants are not interchangeable measurement references.
Inflate the heart-shaped latex balloon to the condition agreed between the wholesale buyer and Borun Balloon Factory. Record the inflation method, condition and sample reference.
Position the heart latex balloon consistently so the two upper lobes, center notch and lower point can be inspected from the agreed front view.
Locate the leftmost and rightmost external points of the inflated heart latex balloon. Measure the maximum horizontal width, without treating the curved perimeter or a diagonal distance as the width.
Record the agreed overall inflated height, actual maximum width, upper-lobe balance, center notch and lower-point appearance. Use the measurement units stated on the approved purchasing document.
The actual Borun photograph confirms that the represented merchandise belongs to the heart-shaped latex balloon product category.
To approve bulk heart latex balloon dimensions, the importer still needs an identified inflated physical sample and a corresponding measurement photograph or written measurement record.
The importer and the factory should connect the actual maximum width, overall inflated height and appearance findings to the same sample identification.
Which inflation state becomes the acceptance reference?
The buyer-approved inflation condition becomes the reference for dimension acceptance. Measuring a lightly inflated heart latex balloon and comparing it with a fully expanded heart latex balloon does not establish reliable manufacturing consistency.
A wholesale heart latex balloon purchasing specification should describe the agreed inflation procedure and sample condition before recording dimension values. The measurement does not become an enforceable order requirement solely because it appears in an isolated photograph.
Inflated Heart Latex Balloon Sample and Measurement Evidence
Verify the nominal heart latex balloon size, applicable actual gram weight, color, finish and requested product variation.
Agree on how the selected heart latex balloon is inflated, which sample state is measured, and how the inflated appearance is maintained during inspection. Record the condition rather than inventing a universal pressure limit.
Record maximum horizontal width and overall inflated height as separate measured fields. Agree on the height endpoints and actual accepted dimensions for the selected product.
Compare upper-lobe balance, center notch, side curves and lower point against the buyer-approved physical sample.
A measurement photograph should show the inflated heart latex balloon, its relevant product identification, the measuring instrument and the measurement direction clearly enough for the buyer to understand what was checked.
When more than one heart latex balloon sample is inspected, the importer should record the number of samples and the individual measurements or agreed summary. An image of a single acceptable heart latex balloon cannot prove that every balloon in a large wholesale shipment has the same dimensions.
Send Borun Balloon Factory the requested heart latex balloon nominal size, color, finish, intended purchase quantity and available dimension references. Request confirmation of the inflation condition, actual maximum horizontal width, overall height, unit weight and physical sample approval requirements.
Request Heart Latex Balloon Measurement ReviewHow are different heart sizes separated in purchase lines?
Each heart latex balloon size must be identified as a separate purchasing configuration. A wholesale inquiry containing several nominal heart balloon sizes should not use one common inflated width or one common actual gram weight for every purchasing line.
Borun Balloon Factory's heart-shaped latex balloon range includes nominal 5-inch, 10-inch, 12-inch, 18-inch and 36-inch products. The buyer should use the corresponding approved physical sample and dimension reference for each size ordered.
The 12-Inch Heart Latex Balloon Height Reference Is Not Its Width
Borun's 12-inch heart latex balloon wholesale size and sample specification describes an approximately 30-centimeter inflated height reference for that specific product. The value does not establish a maximum horizontal width of 30 centimeters.
A wholesale 12-inch heart latex balloon order therefore needs a separately measured maximum inflated width whenever width is an acceptance requirement. The actual unit weight must also be confirmed for the heart-shaped balloon rather than copied from a 12-inch round latex balloon.
Use the approved 5-inch heart latex balloon sample. Record actual maximum horizontal width, agreed overall height, unit weight and quantity on the corresponding wholesale order line.
Measure the 10-inch heart latex balloon configuration independently. Do not scale dimensions from a 12-inch heart latex balloon photograph.
The current product page gives an approximately 30-centimeter inflated height reference. Verify the maximum horizontal width separately on the accepted 12-inch physical sample.
Confirm the applicable 18-inch heart latex balloon variant, inflated measurement values, actual unit weight and required package quantity for the wholesale order.
Confirm the exact 36-inch heart latex balloon product, suitable sample measurement arrangements and order-specific packing and shipping requirements.
The standard minimum order quantity for Borun's wholesale heart latex balloon manufacturing program is 5,000 pieces per design or specification, subject to the confirmed quotation.
Standard packaging and shipping requirements must also be confirmed for the actual heart latex balloon variant. Borun does not apply one fixed master-carton quantity, gross weight, carton dimension or shipping volume to every heart latex balloon wholesale order.
For custom printed heart latex balloons, the buyer should keep logo artwork and approved printing placement connected to the correct inflated heart-shaped surface. Borun can review custom balloon printing, while customized retail balloon packaging is coordinated through its affiliated packaging manufacturing partner.
Which shape deviations must be flagged?
A heart latex balloon can meet a recorded maximum width yet still have an unacceptable heart silhouette. Wholesale buyers should therefore inspect the measured outline as well as its numerical width and height.
Shape Areas Requiring Heart Latex Balloon Supplier Review
Flag a persistent visible imbalance between the left and right upper lobes when compared with the approved inflated heart latex balloon reference.
Flag a central indentation that is absent, excessively displaced or materially different from the approved heart outline.
Flag visibly different side curvature or a distorted profile after confirming that the comparison uses the same product and inflation condition.
Flag a lower section that appears rounded, off-center or inconsistent with the accepted heart-shaped latex balloon sample.
Flag any measured width outside the dimensional acceptance criteria agreed for the specific wholesale order.
Flag a height outside the agreed range or a height measured using different endpoints from the approved inspection method.
A shape difference should not be declared a manufacturing failure until the heart latex balloon specification, inflation condition, sample identity and applicable acceptance criteria have been checked.
Heart Latex Balloon Measurement and Approval Sheet
The following purchasing worksheet is designed for heart latex balloon importers, wholesale distributors and procurement quality managers. It is an editable specification framework, not a completed Borun manufacturing inspection record.
Buyer purchase order, selected heart-shaped latex balloon variant and factory product reference
Exact nominal size in inches, recorded separately for every ordered configuration
Gram weight confirmed for the selected heart latex balloon specification
Inflation method, comparison condition and physical sample identification
Actual measured left-to-right maximum width and approved measurement unit
Actual measured height and the agreed upper and lower endpoints
Upper-lobe balance, center notch, side curves and tapered lower point
Inflated sample photograph, measurement record and corresponding sample version
Actual approved width, height and any applicable numerical tolerance agreed with Borun
Approve, request a revised sample, or hold the heart latex balloon production specification for review
Heart Latex Balloon Supplier Confirmation Decision Table
The factory and the wholesale buyer should complete the following evidence checks before finalizing bulk production.
| Verification Step | Wholesale Buyer Input | Borun Factory Confirmation | Inspectable Evidence | Approval Action or Hold |
|---|---|---|---|---|
| Exact Heart Balloon Variant | Nominal heart latex balloon size, color, finish and requested actual unit weight | Matching manufacturable heart latex balloon configuration | Approved product specification and identified physical sample | Confirm the variant; hold if product identification differs |
| Inflated Sample Condition | Agreed inflation method and sample inspection condition | Comparable factory measurement procedure | Inflated physical sample and documented setup | Approve the reference condition; hold if it is not defined |
| Maximum Horizontal Width | Required actual width or approved sample reference | Measured maximum horizontal width between outer edges | Measurement record and sample photograph with identified measuring method | Confirm actual width; hold if no reliable measurement exists |
| Overall Inflated Height | Required height and measurement endpoints | Actual measured height of the approved product | Height measurement record and sample identification | Confirm separately from width; hold if endpoints are ambiguous |
| Inflated Heart Silhouette | Accepted upper lobes, central notch, side curves and lower point | Corresponding manufacturable heart profile | Approved inflated physical sample and front-view photograph | Accept appearance or request shape correction |
| Multi-Size Wholesale Order | Individual heart balloon sizes, quantities and purchase lines | Size-specific measurements, weight and commercial quantities | Separate specification and approved sample reference for every ordered size | Approve each line independently; do not substitute another size's values |
| Bulk Order and Reorder Approval | Quantity by specification, printing, packaging, destination and prior sample reference | Actual minimum quantity, production requirements and revised sample needs | Confirmed wholesale quotation and dimension approval record | Approve the complete manufacturing order or identify unresolved requirements |
Repeat wholesale heart latex balloon orders should identify the previous approved dimension reference when the same inflated shape is required. Any change to the accepted size, measured width, height, unit weight or approved heart outline may require a revised physical sample review.
Borun Balloon Factory normally prepares applicable physical balloon samples within 3–5 working days and completes standard bulk production within 5–15 working days after required specifications and samples are approved. Actual scheduling depends on the confirmed order.
Request a Heart Latex Balloon Wholesale Factory Quotation with Approved Dimensions
Send Borun Balloon Factory the completed Heart Latex Balloon Measurement and Approval Sheet, exact nominal sizes, measured maximum horizontal widths, overall heights, actual unit weights, chosen colors, required quantities by specification and applicable custom printing requirements.
Include the physical sample reference, measurement photographs when available, packaging requirements, destination country and any unresolved heart-shape approval conditions. Ask Borun to confirm the exact wholesale manufacturing quotation and production schedule.
Submit Heart Latex Balloon Dimensions and Wholesale Order RequirementsFrequently Asked Questions About Heart Latex Balloon Dimensions for Bulk Orders
Which approved heart latex balloon variant does the measurement cover?
The measurement covers the exact nominal heart latex balloon size, color, finish, actual gram-weight specification and identified inflated physical sample. Different heart latex balloon configurations must not share measurements without confirmation.
How is maximum width measured on an inflated heart latex balloon?
At the agreed inflation condition, measure the greatest horizontal distance between the leftmost and rightmost outer edges of the inflated heart latex balloon. Do not use a diagonal distance, curved perimeter or overall vertical height as the width.
What evidence belongs in the heart latex balloon measurement and approval record?
Record the exact product variant, approved inflation condition, measured maximum horizontal width, separately measured height, actual unit weight, silhouette observations, physical sample identification, measurement photographs and written buyer approval.
Does a 12-inch heart latex balloon have a guaranteed 12-inch maximum width?
No. Borun's current 12-inch heart latex balloon product page uses an approximately 30-centimeter inflated height reference. Maximum horizontal width must be measured and confirmed separately on the applicable inflated physical sample.
How are different heart latex balloon sizes separated in wholesale purchase lines?
Specify each nominal size separately, together with its actual unit weight, approved sample, measured width, overall height, color, quantity and packaging. A measurement from one heart latex balloon size must not be used automatically for another.
Which heart latex balloon shape changes require renewed buyer approval?
Review changes to maximum horizontal width, overall height, upper-lobe symmetry, central notch, side curves, lower point or inflation condition when those features form part of the approved wholesale specification.
What should an importer provide for a wholesale heart latex balloon factory quotation?
Provide Borun Balloon Factory with the required heart latex balloon sizes, colors, actual unit weight requirements, approved measurements, inflated sample references, quantities per specification, custom printing requirements when applicable, packaging and destination country.
Wholesale heart latex balloon dimension verification requires more than a nominal inch label. By using the same approved inflation condition, measuring maximum horizontal width separately from overall height, and inspecting the complete heart silhouette, importers can give Borun Balloon Factory a clearer manufacturing specification for physical sample approval, bulk purchasing and repeat orders.
