How to make bouncy balloons using the Balloon Stuffing Machine?

1. Prepare the Balloon Stuffing Machine, the expander, the balloon electric air pump, the appropriate size of the bobo balloons and the items you want to put into the bobo balloons.

2. Stretch the periphery of the bobo balloon and use an balloon electric air pump to inflate it to eight-tenths full to fully extend the bobo balloon.

3. Roll up the edge of the opening of the bobo balloon by 1-2cm and place it on the spreader. Slowly expand it, then turn the spreader over and place it on the Balloon Stuffing Machine. Align the jaws of the spreader and the Balloon Stuffing Machine and press down. Use the pads of your fingers to cover the opening of the bobo balloon on the Balloon Stuffing Machine (to prevent your nails from scratching the bobo balloon). Inflate it to a vacuum state.

4. Place the black sleeves on the Balloon Stuffing Machine to protect the bobo balloons, put the selected items inside the bobo balloons, lift the silicone strip used for sealing, and take out the bobo balloons.

5. Inflate the air to the ideal state with an balloon electric air pump, and then directly tie a knot or tighten it with a sealing clamp.

Notes

①Make sure the interior of the Balloon Stuffing Machine is clean to prevent the bobo balloons from getting dirty or damaged.

② Before inflating, make sure the Bobo balloon is undamaged to avoid air leakage during inflation.

③ Keep your hands dry when operating to prevent the bubble balloons from slipping and affecting their fixation.

④ Follow the instructions for using the Bobo balloon, control the force and prevent overinflation.